Why To Pickle And Passivate
JOB WORK AT SITE
As per ASTM A-380
and deburr the surfaces of metals.
EFFECTIVELY REMOVE ALL FINE AND SUPER-FINE BURRS FROM
SURFACES AND CORNERS. REDUCTION OF THE SURFACE
MICRO-ROUGHNESS IS ALSO ACHIEVED.
Deburrs and micro-smooth corners and faces over the entire wetted surfaces, extending to insides of
Remove recessed burrs resulting from drilling and grinding operations.
Generate a clean metallic surface.
processed without risk of damage.
Ground needle point smoothed using the K - 2 CARBOCHEM Process (enlarged approx. 190 times)
Drilled edge of two cross ports before and afier deburring with the K - 2 CARBOCHEM Process
(enlarged approx. 30 times)
Sheared edge of a stamping (ball bearing cage) before and after deburring with the K - 2 CARBOCHEM
Process (enlarged approx. 300 times)
K-2-SI-56 | K-2 Pickling Paste | K-2 Pickling Spray | K-2 Pickling Dip | K-2 Pickling Duplo | K-2 Passivation |
| K-2 Carbochem | K-2 SSA | K-2 400 Series |
BEST VIEW :
1024 X 768 Pixels
Designed & Hosted by :
Promoted by : GID